3D WIRE BENDING MACHINE

Naeem Siddik Petiwala; Rohit Sunil Shinde; Shaikh Mohd Ateeque; Somnath Shivlingappa Patil; Prof. Abhiram Singhania

doi:10.17605/OSF.IO/D7BHX

Authors

Naeem Siddik Petiwala Department of Mechanical Engineering Alamuri Ratnamala Institute of Engineering and Technology Thane, India
Rohit Sunil Shinde Department of Mechanical Engineering Alamuri Ratnamala Institute of Engineering and Technology Thane, India
Shaikh Mohd Ateeque Department of Mechanical Engineering Alamuri Ratnamala Institute of Engineering and Technology Thane, India
Somnath Shivlingappa Patil Department of Mechanical Engineering Alamuri Ratnamala Institute of Engineering and Technology Thane, India
Prof. Abhiram Singhania Department of Mechanical Engineering Alamuri Ratnamala Institute of Engineering and Technology Thane, India

DOI:

https://doi.org/10.17605/OSF.IO/D7BHX

Keywords:

Modern bending machine, Affordable , flexible, micro-controller

Abstract

This paper proposes the prototype of 3D printed wire bending machine using Arduino uno microcontroller which is flexible as well as capable to make bends for Industrial applications. Till recently many wire bending applications were performed manually and even if there is wire bending machine there are too costly to afford. Wire banding machines has a tendency of making errors which affects the efficiency of wire. As well as elongation of the treatment time. In general, the accuracy of the bend is depending on many factors mostly on the expertise of the operator of machine. Hence because of these limitations in the manual wire bending machine this project proposes the system that can be used to make bends on wire with high efficiency with the help of Arduino uno microcontroller.

Downloads

Download data is not yet available.

References

Wamke P H, Seitz H, Warnke F, et al. Ceramic scaffolds produced by computer-assisted 3D Printing and sintering: Characterization and bio- compatibility investigations. Journal of Biomedical Materials Research Part B Applied Biomaterials 2010; 93(1): 212-217.

TANG Wenxian, ZHU Hui, ZHU Mengxiu, LI Qinfeng, ZHANG Jian “Research on Key Technology of Wire-Bending and Equipment Development” Management Science and Engineering Vol. 10, No. 1, 2016, pp. 14-20.

Chen Minghui, Yao Bin, Lin Rongkun, Lu Rusheng, “Research on 3D Modelling and Forming Simulation of Metal Wire” Advanced Materials Research Online: 2011-11-22ISSN: 1662-8985, Vols. 383-390, pp 6776-6783.

G. Antherieu, N. Connesson, D. Favier, P. Mozer, Y. Payan “Principle and Experimental Validation of a new Apparatus Allowing Large Deformation in Pure Bending: Application to thin Wire” Experimental Mechanics (2016) 56:475–482.

Hyun-Deog Cho, Sung-Jong Choi, “Gear Train Development for CNC Wire Bending Machine” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 7 No. 4, pp.50-55 (2008. 12).