PEDAL POWER PUMP AND PURIFICATION

Abstract

This paper describes the design and construction of the pedal-operated power pump and purefication are done especially for the discharge and purefication of the water. The proposed pump is a rotary pump operated by the pedal power through rear wheel.In this the water enters axially through the vane eye and exits radially.In this paper, necessary dimensions are calculated for the design Purification is the process of purifying of any substance and thus involves filtration . Purification the water by cycling is useful in purifying the water by means of a cycle operated with reverse osmosis process. It includes the cycle pedal being rotated and inlet being connected to the membrane of the Reverse Osmosis setup. It is used to increase the discharge level of the water involved in purification. Hence the amount of water used can be purified and used by these means of purification with a lots of water borne diseases. This method is used in providing he purified water that can be available for all people in a very low cost. An Most of the earth is covered by Water but it needs to be purified before we consumed it.  In Generally water purification needs electricity or fuel along with large systems making purified water more costly. But there are a lot of different purification methods which needs no electricity with minimum cost. One of the purification method is  pedal operated  water purification . In  this purification process mainly basic Bernoulli  principle is used which say that an increase  in the velocity  of a fluid occurs simultaneously with  decrease in pressure or a decrease in the fluid potential energy. Different  people worked on this type of  water  purification system  and  came up with some uniquie designs.