METHODOLOGY FOR ASSESSING THE ENERGY EFFICIENCY OF HEAT-TECHNOLOGICAL EQUIPMENT FOR OIL AND GAS PROCESSING INDUSTRIES

Authors

  • Nodirbek Rustambekovich Yusupbekov Tashkent State Technical University named after Islam Karimov Address: 2, University str., 100095, Tashkent, Uzbekistan
  • Shukhrat Manapovich Gulyamov Tashkent State Technical University named after Islam Karimov Address: 2, University str., 100095, Tashkent, Uzbekistan
  • Nasiba Djumabayevna Xodjiyeva Tashkent University of Information Technology named after Muhammad Al-Khorazmi Address: 108, Amir Temur Avenue, 100200, Tashkent, Uzbekistan
  • Yusuf Shodiyevich Avazov Tashkent State Technical University named after Islam Karimov Address: 2, University str., 100095, Tashkent, Uzbekistan
  • Bakhodir Akilovich Sharipov Tashkent University of Information Technology named after Muhammad Al-Khorazmi Address: 108, Amir Temur Avenue, 100200, Tashkent, Uzbekistan

DOI:

https://doi.org/10.17605/OSF.IO/CM9NT

Keywords:

energy and resource saving, heat technology equipment, methodology for assessing the energy efficiency of heat technology systems.

Abstract

Based on the analysis of the current state of the theory and practice of deep processing of hydrocarbon raw materials, the relevance and relevance of developing a methodology for assessing the energy and resource efficiency of heat-technological devices and installations with the introduction of the efficiency coefficient Ke, which allows taking into account not only the thermodynamic characteristics of the heat-technological system, but also the design characteristics of the studied technological structure, is shown. It is shown that the use of the considered technique in the development of optimal energy-saving systems can significantly reduce energy consumption.

Downloads

Download data is not yet available.

References

Н.Р.Юсупбеков, Ш.М.Гулямов, М.Б.Зайнутдинова, Н.Ж.Хожиева. Анализ информационных характеристик объектов химической технологии // Международный научно-технический журнал “Химическая технология. Контроль и управление”. Ташкент, 2019. – №1 (85). – С.83-88.

Н.Ж.Хожиева. Методы и алгоритми информационной поддержки принятия решений в информационно-управляющих системах .-Ташкент, 202. -41 с.

Т.Тommila, J.Hirvonen, L. Jaakkoln, J.Peltoniemi. Next generation of industrial automation. Concepts and architecture of a component-based control system //VTT Technical Research Centre of Findland, 2005. -PP.58-63.

N.R.Yusupbekov, S.M.Gulyamov, Y.Sh.Avazov, N.J.Khojieva. Methods of organizing energy-closed technology // International scientific and technical journal “Сhemical technology. Control and management”. –Tashkent, 2020. –№2 (92). -PР.21-28.

Downloads

Published

2022-04-09

How to Cite

[1]
Nodirbek Rustambekovich Yusupbekov, Shukhrat Manapovich Gulyamov, Nasiba Djumabayevna Xodjiyeva, Yusuf Shodiyevich Avazov, and Bakhodir Akilovich Sharipov, “METHODOLOGY FOR ASSESSING THE ENERGY EFFICIENCY OF HEAT-TECHNOLOGICAL EQUIPMENT FOR OIL AND GAS PROCESSING INDUSTRIES”, IEJRD - International Multidisciplinary Journal, vol. 7, no. 2, p. 4, Apr. 2022.

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.