DESIGN AND FABRICATION OF THERMOELECTRIC GENERATOR

Abstract View PDF Download PDF

##plugins.themes.academic_pro.article.main##

Adityan Dravid
Mayur Ambikar
Mayur Shelar
Nachiket Shivarkar
Prafulla Chor

Abstract

The current worldwide trend of increasing transportation is responsible for increasing the use of internal combustion engines. I.C engines, the devices with a high energy usage and low efficiency because roughly 75 % of the energy produced during combustion is lost in the exhaust and in the coolant of the engine in the form of heat. As a huge amount of energy is lost, there is urgent need to design a advice to trap this loss. This paper proposes and implements a waste heat recovery system using a thermoelectric generator (TEG) designed for four strokes I.C. engine. The system converts the waste heat from the exhaust manifold into electrical energy using a TEG. The output is then boosted by a Joule Thief converter to run the required load or to charge a battery. The experimental results demonstrate that the proposed system recovers considerable amount of waste heat which can be used to power some auxiliary automobile devices.

##plugins.themes.academic_pro.article.details##

How to Cite
[1]
Adityan Dravid, Mayur Ambikar, Mayur Shelar, Nachiket Shivarkar, and Prafulla Chor, “DESIGN AND FABRICATION OF THERMOELECTRIC GENERATOR”, IEJRD - International Multidisciplinary Journal, vol. 7, no. 3, p. 4, May 2022.

References

  1. Ajay Chandravanshi, Dr. J. G. Suryavanshi, “Waste Heat Recovery from Exhaust Gases through I C Engine Using Thermoelectric Generator” (Research paper, volume: 3 | Issue: 7 | July 2013 | ISSN - 2249-555X), Visvesvaraya National Institute of Technology, Nagpur (440010) Maharashtra, INDIA.
  2. Baskar P, Seralathan S, Dipin D, Thangavel S, Norman Clifford Francis I, and Arnold C, “Experimental Analysis of Thermoelectric Waste Heat Recovery System Retrofitted to Two Stroke Petrol Engine”, International Journal of Advanced Mechanical Engineering. ISSN 2250-3234 Volume 4, Number 1 (2014), pp. 9-14.
  3. Kamelia, Lia and Faroqi, Adam and Muajianisan, Ahmad, “The Conversion of Waste Heat from Motorcycle Into Small Power Plant” OIDA International Journal of Sustainable Development, Vol. 09, No. 01, pp. 79-84, 2016.
  4. Prashantha.K ,Sonam Wango , (2016 ) " Smart Power Generation From Waste Heat By Thermo Electric Generator " , International Journal of Mechanical and Production Engineering (IJMPE) , pp. 45-49, Special Issue 2016
  5. P. Mohamed Shameer1, D. Christopher,“Design of Exhaust Heat Recovery Power Generation System Using Thermo-Electric Generator”-International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064 Index Copernicus Value (2013): 6.14 | Impact Factor (2013): 4.438, Volume 4, Issue 1, January 2015.
  6. Kumar, C. R., et al.: “Experimental study on waste heat recovery from an internal combustion engine using thermoelectric technology” Vol. 15, No. 4, pp. 1011-1022 1011, Year 2011.
  7. “Design and Fabrication of Silencer Waste Heat Power Generation System Using Thermo-Electric Generator’’ by M G Jadhav and J S Sidhu at IJDME on 2017.

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.